Sitename Your slogan goes here

Overview

Description

Overview

Description

• 25 to 150 mm stroke
• Mechanical linkage using joint with take up of play, M4 thread
• Independent linearity up to ± 0.05%
• Infinite resolution
• No variation of electrical signal outside theoretical electrical stroke
• Displacement speed up to 10 m/s
• Working temperature: -30...+100°C
• Electrical connections:
  PY1 F 3 wire 1m screened cable
  PY1 C 5-pole connectors DIN43322
• Life duration: > 100x106 operations (within C.E.U.)
• Double support of the control rod
• Grade of protection IP40

Overview

Description

• The PMI-SL transducer, an evolution of the PMI-12, is designed for all inside cylinder applications which require a smaller transducer. For this reason, the diameter has been reduced to 12.7 mm.
• The PMI Slim offers the same robustness as the PMI-12: AISI 316 stainless steel body, IP67 protection level, and pressure resistance up to 250 bar (400 bar peak)
• Available with flanged or threaded heads, to guarantee mechanical compatibility with all main cylinder types
• Patented solution
• Ideal for applications inside hydraulic cylinders, demanding simple solutions which guarantee measurement repeatability

Overview

Description

• 50 to 750 mm stroke
• Mechanical fixing and selfaligning linkage using 2 ball-joints
• Maximum angular movement up to ± 30°
• Independent linearity ± 0.05%
• Repetibility 0.01 mm
• Infinite resolution
• No variation of electrical signal outside theoretical electrical stroke
• Displacement speed up to 5 m/s
• Working temperature: -30...+100°C
• Electrical connections:
• PC H 3-pole connector
• PC M 4-pole connector to standard DIN43650-ISO4400
• PC B 5-pole connector (DIN43322)
• PC F 3-pole screened cable (1 m length)
• Life duration: > 25x106 meters or > 100x106 operations, whichever is the smaller (within C.E.U.)
• Grade of protection IP65

Overview

Description

• The transducer has been improved in order to guarantee greater reliability under all conditions
• A sturdier structure makes the LT series even stronger for applications with heavy vibration
• Installation is made simpler by the absence of electrical signal variation in output, outside the Theoretical Electrical Stroke
• The new grooves provide an excellent alternative to the usual system of fastening with brackets
• Ideal for applications on plastic injection presses, vertical presses, and on many other processing machines

Overview

Description

• 25 to 300 mm stroke
• Mechanical fixing using brackets, selfaligning ball-joints or flange
• Independent linearity up to ± 0.05%
• Infinite resolution
• No variation of electrical signal outside theoretical electrical stroke
• Displacement speed 10 m/s
• Working temperature: -30...+100°C
• Electrical connection: 3-pole screened cable (1m length)
• Life duration: > 25x106 meters or >100x106 operations, whichever is the smaller (within C.E.U.)
• Grade of protection IP60

Overview

Description

• 10 to 100 mm stroke
• Double support of the control rod and return spring
• Tip with M2.5 thread and stainless steel ball
• Independent linearity up to ± 0.1%
• Infinite resolution
• No variation of electrical signal outside theoretical electrical stroke
• Displacement speed up to 10 m/s
• Working temperature: -30...+100°C
  Electrical connections:
  PY2 F 3 wire 1m screened cable
  PY2 C 5-pole connector DIN43322
• Life duration: > 100x106 operations (within C.E.U.)
• Grade of protection IP40
• Suitable for use in explosive environments with presence of gas (groups IIA, IIB, IIC) and combustible powders.
  Standards for simple device:
  ATEX CEI EN 50020 2003 - paragraph 5.4 a

Overview

Description

• The 1/2” cylindrical housing, plus the option of all fastening systems (brackets, joints or flange), makes the PZ12 series highly versatile for a wide range of applications
• The optimized mechanical structure makes the product suitable for developing various special executions (contact Gefran customer service for details)
• Installation is simplified by the lack of electrical signal variation at output outside theoretical electrical stroke
• Ideal for wood and glass working and finishing machines and for car test benches

Overview

Contactless absolute linear position transducer with ONDA magnetostrictive technology.

The Profibus fieldbus interface integrates in complex systems with long communication distances, guaranteeing rapid and secure data transmission.

The absence of contact on the cursor eliminates all wear and ensures almost unlimited life of the transducer.

Its many advantages include smaller size for easier installation, high protection rating for use in harsh environments, excellent linearity, repeatability, and resistance to vibration and shock, guaranteeing exceptional reliability.

Description

• ONDA technology
• Stroke: 50 to 4000mm
• Position resolution settable via software up to 1 μm
• Speed resolution up to 0.25 mm/sec
• Conforms to CE directives (EN 50081-1 50082-1)
• Vibration-resistant (DIN IEC68T2/6 12 g)
• IP67 protection rating
• Controls up to four cursors simultaneously
• Two M12 connectors for simplified connection to Profibus and one M8 connector for separate connection to power supply (transducer can be powered without having to be connected to bus)
• Local intelligence
• Profibus DPV0 interface on RS485 in conformity to IEC 61158

Overview

Description

• LT67 With shaft - IP67This transducer is designed to guarantee a high protection level (IP67) in applications under harsh conditions and outdoors, where it may be necessary to work in the direct presence of dust, dirt, or liquids (not in prolonged immersion)
• The grooves on the profile provide an excellent alternative to the usual system of fastening with brackets
• Ideal for applications on plastic injection presses with installation at points that are highly exposed to lubricants
• Also indicated for processing machines on which the transducer cannot be protected by guards

Overview

Description

• The PC67 displacement transducer was developed to guarantee a high protection level (IP67) in applications under harsh conditions and outdoors, where it may be necessary to work in the presence of dust, dirt, or liquids (not in prolonged immersion).
• The robust structure of the PC series has been improved thanks to a sealing system (patent pending) that makes it extremely reliable.
• Ideal for mobile hydraulic applications, on agricultural machines, earth-moving equipment and utility vehicles.

Overview

Description

• 25 to 150 mm stroke
• Mechanical linkage using joint with take-up of play, M4 thread
• Independent linearity up to ± 0.05%
• Infinite resolution
• No variation of electrical signal outside theoretical electrical stroke
• Displacement speed up to 5 m/s
• Working temperature: -30...+100°C
• Electrical connections:
  PA1 F 3 wire 1 m screened cable
  PA1 C 5 pole connector 1 m (DIN 43322)
• Life duration: > 100x106 operations (within C.E.U.)
• Grade of protection IP40

Overview

Description

• 10 to 50 mm stroke
• Double support of the control rod and return spring
• Tip with M2.5 thread and stainless steel precision bearing
• Independent linearity up to ± 0.1%
• Infinite resolution
• No variation of electrical signal outside theoretical electrical stroke
• Inhibited rotation of the control rod
• Displacement speed up to 10 m/s
• Working temperature: -30...+100°C
• Electrical connections:
  PY3 F 3-pole 1m. screened cable 1m
  PY3 C 5-pole connector DIN43322
• Life duration: > 100x106 operations (within C.E.U.)
• Grade of protection IP40
• Suitable for use in explosive environments with presence of gas (groups IIA,
• IIB, IIC) and combustible powders.
• Standards for simple device:
• ATEX CEI EN 50020 2003 - paragraph 5.4 a

Overview

Description

• This transducer is designed to guarantee a high protection level (IP67) in applications under harsh conditions and outdoors, where it may be necessary to work in the direct presence of dust, dirt, or liquids (not in prolonged immersion)
• Its high protection level and very small size make the PZ67-S unique in terms of reliability and flexible installation
• It is ideal for glass cutting and washing machines or for honers and sanders if there is direct exposure to liquids or even just steam
• Indicated for test and bench equipment, especially if outdoors

Overview

Description

• This transducer is designed to guarantee a high protection level (IP67) in applications under harsh conditions and outdoors, where it may be necessary to work in the direct presence of dust, dirt, or liquids (not in prolonged immersion)
• Its high protection level and very small size make the PZ67-A unique in terms of reliability and flexible installation
• It is ideal for glass cutting and washing machines or for honers and sanders if there is direct exposure to liquids or even just steam
• Indicated for test and bench equipment, especially if outdoors

Overview

Description

• Rectilinear displacement transducer without drag shaft, completely water-tight (IP67), designed to work in humid environments and in temporary immersion (CEI EN 60529)
• The PME series has an external magnetic actuator linked to an internal measurement cursor
• The magnetic cursor replaces the drag shaft used in traditional displacement transducers, making the instrument even more compact
• Installation is made simpler because there is no variation in the electrical output signal outside the Theoretical Electrical Stroke
• The instrument can be used in compressed air applications with max. working pressure of 20 bar; 50 bar peak

Overview

Description

• Strokes from 50 to 1000 mm
• Magnetic pulling of cursor
• Mechanical anchoring and self-aligning pulling on 2 ball joints
• Max. angle of movement up to ± 26°
• Independent linearity up to fino a ± 0.05%
• Repeatability: 0.08 mm
• Hysteresis: 0.25 mm
• Infinite resolution
• No electrical variation of electrical output signal outside theoretical electrical stroke
• Work temperature: -30°...+100°C
• Electrical connections: cable output shielded with highly flexible polyurethane, 3-pin, 1 m
• Life: > 25x106 m strokes, or >100x106 maneuvers, whichever is less (within U.E.S.)
• Protection level: IP67 (CEI EN 60529)

Overview

Description

• 50 to 1000 mm strokes
• Cursor magnetic drag
• Independent linearity up to ± 0.05%
• Repeatibility: = 0.08 mm
• Hysteresis: = 0.25 mm
• Tracking error (see table)
• Infinite resolution
• No variation of electrical output signal outside theoretical electrical stroke
• Working temperature: -30...+100°C
• Electrical connection: 3-pole polyurethane screened cable with high flexibility (1m lenght)
• AISI 316 stem and nipple
• Lifetime: > 25x106 meters or >100x106 operations whichever is the smallest (within C.E.U.)
• Max. working pressure 250 bar, 400 bar peak

Overview

Description

• The PMI-SLE transducer, is the amplified version of the PMI-SL, a product designed for all inside cylinder applications which require a smaller transducer (the rod diameter is only 12,7 mm).
• The PMI Slim offers the same robustness as the PMI-12: AISI 316 stainless steel body, IP67 protection level, and pressure resistance up to 250 bar (400 bar peak)
• Available with flanged or threaded heads, to guarantee mechanical compatibility with all main cylinder types
  Patented solution
• Ideal for applications inside hydraulic cylinders, demanding simple solutions which guarantee measurement repeatability

Overview

Description

• 100 to 550 mm stroke
• Mechanical fixing by internal or external flange
• Independent linearity ±0,1%
• Infinite resolution
• Repeatability 0,01 mm
• No variation of electrical signal outside theoreticalelectrical stroke
• Displacement speed up to 1,5 m/s
• Working temperature: -30...+100°C
• Electrical connections:
  IC C: 6-pole connector
  IC F: 3 free wires (200 mm length)
• Life duration: > 25x106meters or >100x106operations,whichever is the smaller (within C.E.U.)
• Max.operating pressure 340 bar (5000 psi)
• Suitable for use in explosive environments with presenceof gas (groups IIA, IIB, IIC) and combustible powders. Standards for simple device:ATEX CEI EN 50020 2003 - paragraph 5.4 a

PMI-SL Diameter 12.7mm - Oledynamic cylinders

Overview

Description

• Models 09, 11, 20
• Servo mounting
• Independent linearity up to ± 0.05% (standard ± 0.5%)
• Repetibility 0,01% C.E.T.
• Rotation speed <= 600 r.p.m.
• Life duration: >100x106 operations at 10 r.p.s. (within C.E.U.)
• Infinite resolution
• Electrical terminals: turrets
• Grade of protection IP40

Overview

• Sealed industrial version
• Independent linearity up to ± 0.05% (standard ± 0.5%)
• Working temperature: -55...+100°C
• Repetibility 0.01% della C.E.T.
• Life duration: >100x106 operations at 10 r.p.s. (within C.E.U.)
• Infinite resolution
• Electrical connection: 5-pole connector DIN 43322
• Grade of protection IP65

Description

• Sealed industrial version
• Independent linearity up to ± 0.05% (standard ± 0.5%)
• Working temperature: -55...+100°C
• Repetibility 0.01% della C.E.T.
• Life duration: >100x106 operations at 10 r.p.s. (within C.E.U.)
• Infinite resolution
• Electrical connection: 5-pole connector DIN 43322
• Grade of protection IP65

PCIR For linear or rotary transducers

Overview

Description

• Monodirectional encoder with position hysteresis; outputs x1, x2, x4 (EG01)
• Monodirectional or bidirectional, with or without separate zero reference output, encoder (EG02)
• The power supply requirements and output signal levels are compatible with all the GEFRAN instruments

Overview

Description

• Tachometer with analogue output proportional to the speed and digital output
• The power supply requirements and output signal levels are compatible with all the GEFRAN instruments

Overview

The PCIR signal conditioners have been designed to enable the user to adapt the output impedance of linear or rotative displacement transducers in conductive plastic for acquisition systems or PLC, in a way that does not alter the linearity of the transducer itself.

Description

• High impedance input >100 Mohm
• Voltage output 0...10 V
• Linearity error < 0.02% full scale output
• Can be connected simultaneously to two transducers
• Low thermal drift 0.01% full scale / °C
• Suitable for DIN rail mounting EN50035 and EN50022